WETWO PP Cosmetic Packaging for Beauty Brands

WETWO supplies custom PP cosmetic packaging for skincare, makeup, deodorant, body care, and other beauty projects. Compare polypropylene bottles, jars, Full PP deodorant bottles, airless and refillable structures, and matching components, then confirm the capacity, color, decoration, material source, and dispensing system for your product.

WETWO PP Cosmetic Packaging Project Support

WETWO supports PP cosmetic packaging projects with 15 years of packaging experience and work completed for more than 1,000 clients and brands. Our production resources include 30 injection molding machines and additional blow molding equipment for applicable packaging formats. You can start with an existing mold or develop a private design with 2D and 3D drawing support. We coordinate the container, cap, pump, inner part, color, and decoration as one approved packaging version, while confirming which components are actually made from PP. Suitable existing models can be sampled before mass production, and bottles, jars, pumps, caps, or refill parts can be packed separately when that arrangement suits your filling process. Your own design and customer-funded private mold remain exclusive to your project.

WETWO PP Cosmetic Packaging Options by Format

Choose the packaging format first, then confirm where PP is used in the complete structure. The capacities and applications below are common planning directions; availability and the final component materials depend on the selected WETWO model.

Blue and pale green dropper bottles with pipettes
Bottle Formats

PP Cosmetic Bottles

Covers PP serum, dropper, lotion, toner, cleanser, fine mist spray, pump and flip-top bottles. The body can be matched with a treatment pump, lotion pump, sprayer, dropper or disc-top cap, and each component is confirmed separately before the pack is described as Full PP.

Lavender and cream cosmetic jars stacked with lids ajar
Jar Formats

PP Cosmetic Jars

Includes cream, eye cream, mask, balm, body butter and sample jars. Compare single-wall, double-wall, airless and refillable jars with a removable inner cup; body, lid, liner, sealing disc and spatula are reviewed as separate components.

Refillable PP pump bottles in white with refillable inner bottles
Dispensing Systems

PP Airless and Refillable Packaging

Includes airless pump bottles, airless jars, and refillable bottles or cream jars with a replaceable inner bottle, cup or cartridge. These formats suit controlled dispensing or a reusable outer pack, and the complete material list is confirmed per model.

Two natural deodorant sticks with kraft-style labels
Stick Formats

Full PP Deodorant Bottles

Includes twist-up, push-up, roll-on and refillable deodorant formats. On verified Full PP models the body, cap, roller ball or internal platform and the movement are designed in PP, from mini travel sizes to larger retail packs.

WETWO PP Cosmetic Packaging Materials and Structure

Use the following tables to narrow the packaging route before selecting samples. They separate product format, material source, and complete-pack structure so that a PP component is not confused with an all-PP package.

FormatCommon beauty applicationsCapacity directionMain selection point
PP bottleLotion, toner, cleanser, hair care and body careMini, standard retail and larger daily-use sizesBottle body, opening, pump or cap, formula and filling method
PP jarCream, mask, balm, eye care and body butterSample, travel, retail and larger treatment sizesSingle or double wall, inner cup, lid, liner and product access
PP airless and refillable packSerum, lotion, cream and treatment formulasCompact to standard retail and refill sizesComponent materials, filling method, dispensing, refill connection and separation
Full PP deodorant bottleSolid deodorant, balm and suitable body-care sticksTrial, travel, standard and larger retail sizesComplete PP component list, twist-up or push-up movement, filling method, cap fit and product release
Material directionWhat it meansWhat must be confirmed
New resin PPNewly produced PP used for the identified bottle, jar or componentResin specification, appearance, color, formula contact and processing route
PCR PPPP with confirmed post-consumer recycled content in an identified partTarget percentage, supply source, color tolerance, formula-contact requirement and target market
Mono-material PP structureA pack designed so the identified main components use PPEvery component, seal, label, decoration and local recycling requirement
Mixed-material pack with PPPP is used for selected parts while other materials serve different functionsComplete bill of materials, separation, performance and accurate environmental claims
Project factorWhy it mattersWhat to provide or test
FormulaOils, solvents, fragrance, colorants and texture can affect the selected packActual formula, product type and required storage review
Filling processFill temperature, equipment and assembly sequence affect the packaging choiceFilling method, line details, sealing and component-handling requirements
DispensingPump, airless, cap, opening and product viscosity work as one systemDesired output experience, actual-formula trial and closure operation
Appearance and claimsPP grade, PCR content, color and decoration can change the final lookColor reference, artwork, finish, PCR target and destination market

WETWO Custom PP Cosmetic Packaging for Your Brand

Your custom PP cosmetic packaging can begin with an existing mold or a private structure developed for your brand. For an existing model, WETWO reviews the container shape, capacity, PP components, pump or cap, inner parts, decoration area, and available color direction. If the project needs a new shape, refill connection, wall structure, or component change, 2D and 3D drawings can be prepared or reviewed before tooling. Custom options may include molded color, matte or gloss appearance, surface texture, printing, hot stamping, labeling, or other decoration approved for the selected PP surface. Share the formula type, reference pack, artwork, color standard, quantity, target market, and filling arrangement. We then confirm which design choices fit the actual molding process, component assembly, and decoration method rather than treating every PP grade and surface as identical.

WETWO PP Cosmetic Packaging Samples and Formula Testing

Samples help your team confirm the selected PP cosmetic container with the actual formula before mass production. Check how the product fills, seals, dispenses, closes, and remains around the opening after use. Review bottle, jar, or deodorant-pack dimensions, component fit, leakage, cap or pump operation, airless function where applicable, refill installation, twist-up or push-up movement, filled appearance, and decoration adhesion. A material that works for one formula or component should not be assumed to work for every product, so record the PP specification, PCR target, pack model, component version, formula, and test conditions with each result. Your filling team should also review the complete pack on the intended equipment and observe filled samples under the storage and transport conditions relevant to the project. The approved sample, material record, artwork, and specification then become the production reference, while final compatibility remains subject to your product and market validation.

WETWO PP Cosmetic Packaging Manufacturing and Mass Production

After the sample, material route, artwork, and packaging specification are approved, WETWO prepares the confirmed version for manufacturing. The production file records the container model, capacity, PP grade or material source, PCR percentage where applicable, component materials, color, decoration, order quantity, and packing method. Injection molding is used for applicable PP jars, caps, pumps, airless parts, refill parts, deodorant mechanisms, and other molded components, while selected bottle formats may use a suitable blow-molding process. The first production pieces are compared with the approved sample and drawings before mass production continues. When an order includes several colors, sizes, refill versions, deodorant mechanisms, or resin routes, each version is identified separately to reduce mix-ups. The approved material and component record stays connected to the finished order so a change in one PP part is not silently applied to the entire packaging set.

WETWO PP Cosmetic Packaging Quality Control

WETWO quality control checks the finished PP cosmetic packaging against the approved order references before shipment. Inspectors confirm the correct container, PP component, material route, color, capacity, visible finish, and matching parts. Dimensions, weight, opening, thread, wall structure, and assembly can be measured according to the project specification. Caps, pumps, airless systems, refill parts, deodorant platforms or screws, liners, and inner cups are checked for the functions relevant to the selected format. Printed, stamped, labeled, or textured surfaces are reviewed against the approved artwork and color reference, while PCR versions follow the agreed appearance range and identified material specification. Product references, quantities, component packing, cartons, and shipping marks are also checked before release. Items that do not match the confirmed requirements are separated for review instead of being mixed into the finished order.

WETWO PP Cosmetic Packaging Supply for Wholesale and Repeat Orders

Stable PP cosmetic packaging supply begins with an accurate forecast and a controlled material and component version. Share the expected quantity for each container, color, capacity, PCR route, and decoration, together with the target shipping date and likely reorder schedule. For repeat orders, WETWO uses the approved sample, material record, artwork, component list, and previous order information to identify the correct packaging. Any change to the PP grade, recycled content, color, cap, pump, inner part, decoration, carton, or shipping requirement is reviewed before the next order is confirmed. We can coordinate wholesale orders, large-volume orders, and planned reorders with suitable export cartons, pallet arrangements, LCL or FCL shipping, and related export documents. Material availability, production scheduling, and delivery timing are confirmed for each order rather than presented as permanent stock.

WETWO PP Cosmetic Packaging Team Support

A PP packaging project may involve your brand team, formula developer, designer, filling factory, purchasing team, and freight partner. WETWO keeps one sales contact connected to the project and brings in technical, production, quality, or logistics support when a decision needs additional review. Your team can identify who approves the container format, formula test, PP specification, PCR percentage, color, decoration, commercial terms, and final order. We keep the latest approved drawing, sample, material record, artwork, and component list separate from earlier versions. This is especially important when one project includes new resin and PCR options, several refill formats, or different component materials. Clear responsibilities and version references help each team work from the same approved PP cosmetic packaging specification.

WETWO PP Cosmetic Packaging with PCR, Mono-Material, and Refill Options

PP can support several packaging-reduction and material-content directions, but each claim must match the identified components and the complete pack. For applicable bottles, jars, caps, pumps, airless parts, refill components, or deodorant parts, WETWO can review PCR targets such as 30%, 50%, 70%, or 100%. The confirmed percentage applies only to the named part unless the complete packaging specification proves otherwise. A mono-material PP route focuses on using PP across the intended main components, while a refillable route focuses on keeping an outer pack and replacing an inner part; either route may use new resin, PCR, or a combination approved for the project. Labels, seals, springs, decoration, adhesives, and other parts can affect separation and recycling. Share the destination market, formula-contact requirement, PCR target, mono-material goal, refill plan, color, and appearance standard so the available route can be reviewed without making a universal recyclability claim.

Please enable JavaScript in your browser to complete this form.
Click or drag a file to this area to upload.

FAQ About WETWO PP Cosmetic Packaging

What affects the MOQ for custom PP cosmetic packaging?

The MOQ depends on the container model, PP material route, color, PCR percentage, decoration, component combination, quantity per version, and whether the project uses an existing mold or private tooling. Send the required quantity for each design, and WETWO will confirm the applicable MOQ in the quotation.

Send the product type, formula direction, preferred bottle or jar format, capacity, pump or cap, PP or PCR requirement, color, decoration, quantity, destination, and target date. A reference image, drawing, artwork, or existing package helps us understand the project faster.

Yes, when the selected product and supply route support that requirement. Provide the target PP specification, PCR percentage, formula-contact requirement, destination market, and any customer standard. WETWO will identify which components can follow it and what evidence or testing is needed.

No. An existing mold means new tooling may not be required for the approved structure. Resin, color, component, decoration, production scheduling, and delivery timing are confirmed separately for each order.

For suitable existing models, WETWO usually provides two or three samples and the customer pays the courier cost. If a custom sample, special material route, decoration, or new tooling creates an additional charge, the cost is confirmed before work begins.

The quotation identifies the agreed container and matching components included in the project. Printing, decoration, special PP or PCR requirements, tooling, and custom sampling are calculated according to the confirmed specification and listed where relevant.

A customer-funded private mold and its packaging design remain exclusive to that project. Selecting a shared existing mold does not make the original container shape exclusive, while the customer’s own artwork and design files remain protected for the project.

Mass-production orders usually use a 30% T/T deposit with the 70% balance paid before shipment. A sea-shipment balance against the bill of lading may be agreed separately. Charged samples are paid 100% by T/T before dispatch.

Send clear photos of the affected containers or components, inner packing, cartons, labels, and confirmed damaged quantity. After the information is reviewed, WETWO adds the confirmed replacement products to the next order at no charge.

WETWO PP Cosmetic Packaging: Start Your Project

Share your product type, packaging format, capacity, material goal, and estimated quantity. A reference pack or artwork is also helpful. WETWO will help you confirm product options, samples, or the next quotation step.

Scroll to Top

Contact US

Please enable JavaScript in your browser to complete this form.
Click or drag a file to this area to upload.